Something is wrong .. @Using Paladin Scripts

[faded181]

Hi, I uploaded two different paladin scripts that are made from Xenobot. The first one, Edron Dragon's. The Second one Darashia Dragon's. I'm a level 50+- Paladin. I tried running the bot with the config file setting after that didn't work, I tried putting true under Manual Condition. For some reason my paladin just keeps running right past the dragon's using the spell exori san. Does anyone else have this problem? I will try my script, that I know will work from Bollo and try at Cyclopsis, where I was hunting like -2 without problem. I will see if that works and report the outcome but I am just wondering, is anyone else having this problem with paladins?

[faded181]

I decided not to go to edron cyclops because I've already spent some time on this already. I will wait for a reply.

My config is this - in both script's I disabled exori con and thats really about it.

Darashia Dragons for XenoBot
; ::63baa41fb03424b6cc2d045161332be1

[General]
Minimize-Backpacks = true ; Do you want to minimize your backpacks? (true/false)
Organize-Backpacks = true ; Do you want to automatically organize the contents of your backpacks on launch? (true/false)
Manual-Shooter = false ; Enable to configure the XenoBot MagicShooter manually, script will not override shooter in the XBST. (true/false)
Cure-Conditions = false ; Do you want to automatically cure harmful conditions when returning to town? (true/false)

[Loot]
Npc-Sell = false ; Do you want to automatically sell loot? (true/false)
Loot-Style = last ; The order in which you loot creatures. (first/last)
Loot-Gold = true ; Do you want to loot gold? (true/false)
Loot-Min-Value = 10 ; The minimum value, per item, to loot. (0 to disable)
Loot-Max-Weight = 0 ; The maximum weight, per item, to loot. (0 to disable)
Loot-WhiteList = golden helmet, sword of valor
Loot-BlackList = steel helmet, steel shield, crossbow, plate legs, longsword, double axe

[Lure]
Amount = 0 ; The amount of creatures to activate lure mode. (0 to disable)
AttackWhileLure = false ; When enabled, target and loot as you lure creatures. (true/false)
MinPriority = 1 ; Minimum priority of the targets to consider. (0-9)
Until = 0 ; The amount of unkilled creatures to start luring again. (0 to disable)

[Food]
FoodName = orange ; Name, or item id, of the food.
FoodMin = 0 ; The amount of food at which you will leave to go refill.
FoodMax = 0 ; The amount of food you want to withdraw or buy. (0 to disable)
FoodAlarm = 0 ; The amount of food to trigger an alarm. (0 to disable)

[Potions]
HealthName = strong health potion ; Name, or item id, of the potion. (Update your Support if you change this!)
HealthMin = 5 ; The amount of potions at which you will leave to go refill.
HealthMax = 20 ; The amount of potions you want to withdraw or buy. (0 to disable)
HealthAlarm = 0 ; The amount of potions to trigger an alarm. (0 to disable)

ManaName = mana potion ; Name, or item id, of the potion. (Update your Support if you change this!)
ManaMin = 60 ; The amount of potions at which you will leave to go refill.
ManaMax = 120 ; The amount of potions you want to withdraw or buy. (0 to disable)
ManaAlarm = 7 ; The amount of potions to trigger an alarm. (0 to disable)

[Ammo]
AmmoName = royal spear ; Name, or item id, of the ammunition.
AmmoMin = 9 ; The amount of ammo at which you will to go refill.
AmmoMax = 21 ; The amount of ammo you want to withdraw or buy. (0 to disable)
AmmoAlarm = 3 ; The amount of ammo to trigger an alarm. (0 to disable)

[Spells]
ExevoMasName = exevo mas san ; Name of the spell.
ExevoMasEnabled = false ; Do you want to use this spell? (true/false)
ExevoMasPriority = 1 ; Priority compared to other runes and spells. (lower is more important)
ExevoMasTargetMin = 3 ; The minimum amount of creatures, in the list below, to begin attacking. (0 to disable)
ExevoMasMaxHP = 100 ; The maximum health of creatures, in the list below, to cast this spell.
ExevoMasMinHP = 0 ; The minimum health of creatures, in the list below, to cast this spell.
ExevoMasTargets = dragon, dragon hatchling

ExoriSName = exori san ; Name of the spell.
ExoriSEnabled = true ; Do you want to use this spell? (true/false)
ExoriSPriority = 2 ; Priority compared to other runes and spells. (lower is more important)
ExoriSTargetMin = 1 ; The minimum amount of creatures, in the list below, to begin attacking. (0 to disable)
ExoriSMaxHP = 100 ; The maximum health of creatures, in the list below, to cast this spell.
ExoriSMinHP = 0 ; The minimum health of creatures, in the list below, to cast this spell.
ExoriSTargets = dragon, dragon hatchling

ExoriCName = exori con ; Name of the spell.
ExoriCEnabled = false ; Do you want to use this spell? (true/false)
ExoriCPriority = 3 ; Priority compared to other runes and spells. (lower is more important)
ExoriCTargetMin = 1 ; The minimum amount of creatures, in the list below, to begin attacking. (0 to disable)
ExoriCMaxHP = 100 ; The maximum health of creatures, in the list below, to cast this spell.
ExoriCMinHP = 0 ; The minimum health of creatures, in the list below, to cast this spell.
ExoriCTargets = dragon, dragon hatchling

[Ring]
RingName = sword ring ; Name, or item id, of the ring.
RingMin = 0 ; The amount of rings at which you leave to go refill. (0 to disable)
RingMax = 0 ; The amount of rings you want to withdraw from the depot. (0 to disable)
RingCreature-Equip = 3 ; The amount of creatures to equip the ring. (0 to disable)
RingHealth-Equip = 30 ; The percent of health equip the ring. (0 to disable)
RingMana-Equip = 10 ; The percent of mana to equip the ring. (0 to disable)
RingAlarm = 0 ; The amount of rings to trigger an alarm. (0 to disable)

[Amulet]
AmuletName = protection amulet ; Name, or item id, of the amulet.
AmuletMin = 0 ; The amount of amulets at which you leave to go refill. (0 to disable)
AmuletMax = 0 ; The amount of amulets you want to withdraw from the depot. (0 to disable)
AmuletCreature-Equip = 3 ; The amount of creatures to equip the amulet. (0 to disable)
AmuletHealth-Equip = 30 ; The percent of health to equip the amulet. (0 to disable)
AmuletMana-Equip = 10 ; The percent of mana to equip the amulet. (0 to disable)
AmuletAlarm = 0 ; The amount of amulets to trigger an alarm. (0 to disable)

[Supplies]
FlaskName = flask of rust remover ; Name, or item id, of the rust remover.
FlaskMin = 0 ; The amount of rust removers at which you will leave to go refill. (0 to disable)
FlaskMax = 0 ; The amount of rust removers you want to withdraw. (0 to disable)
FlaskAlarm = 0 ; The amount of rust removers to trigger an alarm. (0 to disable)

[Soft Boots]
Mana-Percent = 0 ; What percent of mana to begin using softboots? (0 to disable)

[Mana Restorer]
Restore-Percent = 0 ; Mana percent to restore mana up to while no creatures are on-screen. (0 to disable)
Range = 7 ; What range do you want to consider creatures before restoring mana?

[Capacity]
Hunt-Minimum = 50 ; If capacity goes below this value, script will exit the spawn. (0 to disable)
Drop-Flasks = 100 ; If capacity goes below this value, script will drop flasks. (0 to disable)
Drop-Gold = 0 ; If capacity goes below this value, script will drop gold. (0 to disable)

[Logout]
Stamina = 14 ; At how much stamina would you like to log out? (in hours)
Level = 0 ; At what level would you like to logout? (0 to disable)
Server-Save = 0 ; How many hours before server save would you like to logout? (0 to disable)
Time-Limit = 0 ; The maximum number hours to hunt. (0 to disable)
Train-Skill = none ; The training statue to use. (none, sword, axe, club, spear, magic)
Exit-Log = false ; When logging out & not training, client will exit. (true/false)

[HUD]
Enabled = true ; Would you like to enable the HUD? (true/false)
Show-Supplies = true ; Would you like to show individual supplies? (true/false)
Show-Loot = true ; Would you like to show individual loot? (true/false)
Show-Icons = true ; Whether to show the loot icons in the HUD. (true/false)
Theme = light ; Color theme options for the HUD. (light, dark, orange, pink, green, blue, purple)
Simple-Time-Format = false ; Do you want to display time in HH-MM instead of DD-HH-MM-SS?
Per-Stamina-Measurement = false ; Do you want to measure hourly exp and profits per used stamina instead of passed time?

[Joshwa534]

Hi, I uploaded two different paladin scripts that are made from Xenobot. The first one, Edron Dragon's. The Second one Darashia Dragon's. I'm a level 50+- Paladin. I tried running the bot with the config file setting after that didn't work, I tried putting true under Manual Condition. For some reason my paladin just keeps running right past the dragon's using the spell exori san. Does anyone else have this problem? I will try my script, that I know will work from Bollo and try at Cyclopsis, where I was hunting like -2 without problem. I will see if that works and report the outcome but I am just wondering, is anyone else having this problem with paladins?

There was an update to paladins and how they shoot with today's XenoBot update, is this happening with the latest version of XenoBot or was this happening prior to today?

[shadowart]

Can you post a screenshot with diagnostics on while he is running through the spawn?

[faded181]

I can not vouch for it happening before, since I only used the BOLLO Script for cyclopsis. I will go run the script and see if my paladin run past them like they do dragon's. When I opened xenobot it said that the bot was up to date as well. I will be back in 7 minute's with the outcome of bollo script.

[faded181]

shadowart I am not sure how to do that

[Joshwa534]

I can not vouch for it happening before, since I only used the BOLLO Script for cyclopsis. I will go run the script and see if my paladin run past them like they do dragon's. When I opened xenobot it said that the bot was up to date as well. I will be back in 7 minute's with the outcome of bollo script.

Awesome thanks, we look forward to hearing what's up.


I am not sure how to do that

Right-click your character -> Visuals -> check the box for Diagnostics -> hit "Print Screen" on keyboard. Upload screenshot to imgur.com, paste the link here.

[faded181]

So that script works fine. I stop and kill creature. I will submit screen of diagnostics, i guess, when im running from the dragons? I'l try it that way.

[faded181]

Blah, i saved setting for when i changed strong mana potion to mana potion ... lol not sure, it didn't save, but I died... Check back later...I think... it started working properly ....

[Joshwa534]

Blah, i saved setting for when i changed strong mana potion to mana potion ... lol not sure, it didn't save, but I died... Check back later...I think... it started working properly ....

Alright, let us know sir, we'll be waiting to back about the issue.

[faded181]

Alright, let us know sir, we'll be waiting to back about the issue.

Just a heads if, you get the time. For the paladin one I noticed after the creature got to red health my guy would stop attacking. In the targetting section theres a 10% hp gap from when you switch from 3SQM to following the creature. If you get time maybe you could swich it if it's not to much trouble.

Thats for the darashia dragons paladin script.

[Joshwa534]

Just a heads if, you get the time. For the paladin one I noticed after the creature got to red health my guy would stop attacking. In the targetting section theres a 10% hp gap from when you switch from 3SQM to following the creature. If you get time maybe you could swich it if it's not to much trouble.

Thats for the darashia dragons paladin script.

Thanks, its patched but won't be released until my next release.