★★★ [ SolidScripts ] ★★★ Binary Ready • 200+ Scripts • 100% AFK • HUD • Quick Support

Quote:

---

Originally Posted by Stusse

You can add druid spells in the config as well. Just copy one line with spells and add similar. Make sure though so the commas (,) line up.

Our withdrawer is counting the ones you already have, as long as it can see the ones you have already. Since your bp should be open he will withdraw up to the amount set. If you have 140 he will withdraw 60 to reach 200.

It says 1 when it means 2 and so forth due to indexing. For example your main bp has index 0. First depot has slot 0. This may confuse some, but we've tried to make it as clear as possible with comments. If any questions like these feel free to ask and we'll help :)

/Stusse

---

yep i got it! but he still withdraws more than he should like he ignores them, i will check next resup!

Quote:

---

Originally Posted by Stusse

You can add druid spells in the config as well. Just copy one line with spells and add similar. Make sure though so the commas (,) line up.

Our withdrawer is counting the ones you already have, as long as it can see the ones you have already. Since your bp should be open he will withdraw up to the amount set. If you have 140 he will withdraw 60 to reach 200.

It says 1 when it means 2 and so forth due to indexing. For example your main bp has index 0. First depot has slot 0. This may confuse some, but we've tried to make it as clear as possible with comments. If any questions like these feel free to ask and we'll help :)

/Stusse

---

ok i need hleep with this now. he gets 300 thudners no matter how many i got on me, walk to mana shop, fail because no cap, goes to dp get thudnerstorm now i got 900 in my bp wtf?

bottom line: He isnt counting my thudnerstorm, my bps are all open.

edit maybe i fixed it now he put theem before in main bp instead of rune bp!

Quote:

---

Originally Posted by Andrea7

Hi there, I got Mage script, 40+ Lion’s Rock, I I know its for free, but just wanted to say that it gets stuck at 33126,32339,8 and cannot find the way-point. Would appreciate quick response.

---

Please post screenshot with walker open!

Quote:

---

Originally Posted by shinynat

It's happening all the time. I have spent a few hours watching my bot yesterday. Every time it went back from the island to Liberty Bay it would get stuck just before the depo and start moving back and forth for 10 minutes. Finally I would lose my patience and move the bot myself, putting it in the depo. I had people laughing at me saying "hahaha wow mate your bot sucks". And then it would be stuck again after selling all the loot, buing potions etc inside the depo as I have described before. It works fine insdie the island, it goes to the waypoints, kills zombies, loots items. It all happens in Liberty bay 1. inside depo 2. just before the depo when the bot goes back from the island. I am so disappointed to be honest because the exp itself is not bad, i get around 100K an hour but I can't risk leaving the bot on when it's getting stuck like this and getting me reports. Please have a look at that. If you can't fix it I would be happy with a different script for my lvl range.

---

Are you using mapclicks or normal in pathfinder?

Is it a stand or node waypoint that it gets stuck/starting to act weird on? If it's a node you can try to delete the node where it starts acting weird and see if it helps. (You can always re-download the script if something bad happens so no worries).

/Stusse

There is the screenshot:
http://s24.postimg.org/eawubg205/booog.png

http://postimg.org/image/btl346i3l/


It stops at 33126,32339,8, I was just trying to change and see if it works on other way points that's why the its different on the pic. http://postimg.org/image/btl346i3l/

Quote:

---

Originally Posted by Andrea7

Hi there, I got Mage script, 40+ Lion’s Rock, I I know its for free, but just wanted to say that it gets stuck at 33126,32339,8 and cannot find the way-point. Would appreciate quick response.

---

Quote:

---

Originally Posted by shinynat

It's happening all the time. I have spent a few hours watching my bot yesterday. Every time it went back from the island to Liberty Bay it would get stuck just before the depo and start moving back and forth for 10 minutes. Finally I would lose my patience and move the bot myself, putting it in the depo. I had people laughing at me saying "hahaha wow mate your bot sucks". And then it would be stuck again after selling all the loot, buing potions etc inside the depo as I have described before. It works fine insdie the island, it goes to the waypoints, kills zombies, loots items. It all happens in Liberty bay 1. inside depo 2. just before the depo when the bot goes back from the island. I am so disappointed to be honest because the exp itself is not bad, i get around 100K an hour but I can't risk leaving the bot on when it's getting stuck like this and getting me reports. Please have a look at that. If you can't fix it I would be happy with a different script for my lvl range.

---

Quote:

---

Originally Posted by Andrea7

There is the screenshot:
http://s24.postimg.org/eawubg205/booog.png

http://postimg.org/image/btl346i3l/


It stops at 33126,32339,8, I was just trying to change and see if it works on other way points that's why the its different on the pic. http://postimg.org/image/btl346i3l/

---

You dont have full maps. Either download and extract from www.tibiamaps.org, or go to Pathfinder->Enable Mapclick. (You should after ran 1 lap to discover maps, uncheck mapclicks again, since running with mapclicks can prevent from walking over parcels etc. But use it to discover maps it will help :)

/Stusse

Right... dunno how to feel now haha,it helped, thanks a lot!!!

Quote:

---

Originally Posted by Andrea7

Right... dunno how to feel now haha,it helped, thanks a lot!!!

---

You are welcome :)

Quote:

---

Originally Posted by Ryszard

You are welcome :)

---

hello,

on banuta scripts -2, the targeting loads not in targeting ingame only in the script, i was wondering how can i fix this? because i need it to be pvp safe to retro pvp! thanks!

Quote:

---

Originally Posted by jollebollen

hello,

on banuta scripts -2, the targeting loads not in targeting ingame only in the script, i was wondering how can i fix this? because i need it to be pvp safe to retro pvp! thanks!

---

EK Banuta -2?

What do you mean it doesnt load? Check the SolidScripts channel to see what spells are imported to the client from CONFIG for example. Doublecheck so you have CONFIG file in right place.

/Stusse

Quote:

---

Originally Posted by Stusse

EK Banuta -2?

What do you mean it doesnt load? Check the SolidScripts channel to see what spells are imported to the client from CONFIG for example. Doublecheck so you have CONFIG file in right place.

/Stusse

---

nono the shooter shoots perfectly but it doesn't load into the client's targeting shooter, only its own shooter in scripts so it doesn't check if it's pvp safe :)